Download Pro

Resetter canon 1980 1880 iP2500 iP1900 iP1100 iP1800

--> Error printer Always appear message:
“The Ink Absorber is Full
Contact The service Center”.

-->

1. Press and hold power button with your finger and then take in power cable
2. Hold power button, then press resume button with your middle finger twice.

3. Let in power button

4. Printer doesnot blinking any more.

5. At this step you had done Manual Reset Step and printer could be use again.

6. But if manually your printer still error, you should use Reset Software permanently

1. Download software tool

2. Extract file ZIP.

3. Do GeneralTool.exe

4. At USB Port choose your Port printer.

5. Click Lock Release button

6. Choose (check) EEPROM CLEAR

7. Take blank paper to print. Then click Test Pattern 1 button
8. Finish and your Printer will be normally

The methodes : here

Available link for download

Reset Ink Level Printer Canon Pixma iP1800 Using iPtool

I get this tutorial from forum http://www.fixyourownprinter.com solve the ink level error in canon Pixma iP1800/Canon Pixma iP1880. Problem in the canon cartridges after refillled, the ink level never reset from the original empty status and you can’t print at all since the ink level are reporting that the cartridges are totally empty.

If you have the like that, try this to solve the problem.

1. Press power button while plug in the powerchord – green lamp.
2. While hold the power button press resume button twice – orange blink and return to green.
3. Release the power button, Then the pc will recognize new printer install.
4. Then run the iptools from software
5. Click the reset black reset color
6. Click the reset main and reset platen. You will see in the iptol menu that the ink level will be reseted and the WP and WM will set to 0 and new cartridege installed. then exit
7. Restart the printer
   

If the problem still occured, do the same procedures from 1 to 3 then.

• Click the eeprom reset botton
• Wait for for a second the menu will be resetted and the printer will initialized.
• Turn off the printer then turn on and try to print..
  

by the way i recognize the printer that if u park the head of printer in the replace ink area position, there will be a blinking error u will notice after a few print or after used you need to reset the eeprom in iptools.

Available link for download