Download Pro: Resetter Canon Pixma IP 2270

Thursday, November 24, 2016

The first step

Make sure that the printer Canon IP in 2770 is turned off (Off) But the power cable (electricity) is attached.
Press the RESUME button for approximately 2 seconds
After you press the POWER button until the green light flame (when pressing the POWER button, the Resume button not released yet).
Then release the RESUME button, but do not release the button POWER.
While the POWER button is still depressed, press the Resume button 5 times. Led will light turns green to orange last flame orange. (not to be mistaken because the printer will die 4x total, but temporary as well)
Release both buttons simultaneously.
Led will blink for a while and then will flash GREEN.
The computer will detect the new device, please ignore
This situation shows the printer IP 2770 in a state SERVICE MODE and ready to reset.

After the first step you do it perfectly then the second step you have to do is to use software resetter canon ip 2770. The steps are as follows:

Download software resetter Canon Pixma 2270
Exctract iP2770 Resetter Software
ServiceTool_V1074_iP2770
Prepare 2 paper in the printer (to print at the time of the reset process).
Run Software Resetter Printer Canon IP 2770
Click "PLAY", then the printer will proceed, then iP2770 will print one page with the words "D = 000.0".
Click "Clear EEPROM"
Then click "EEROM", and the printer will print the results iP2770 Resetter. One row writing as follows: "TPage (TTL = 00000)"

Available link for download